Nail Tool/Implement Sterilizer Machine
 
How to use:
 
1. Place the sterilizer on a flat surface.
2. Open the lid and place quartz sand (included) in the liner. Do not use too much quartz sand (not more than 80% of the liner volume) . Turn on the power/turn on the power switch, turn on the heat indicator, and start heating the sterilizer. The Red Light is the power light, the green light is the heating light, when the heating temperature reaches the preset temperature, the green light is extinguished to stop the heating; when the temperature drops to about 15 degrees, it will automatically reset to continue heating, and keep working in a continuous cycle. UNPLUG when not needed.
3. After heating for 10 to 12 minutes, vertically insert the sterilizing tools (e. g. scissors, razor, etc.) into the quartz sand.
4. Heat the tool for 20 to 30 seconds. Put on gloves and remove the tool.
5. When the temperature of the sterilizer reaches 185 °C, the heating indicator lamp will be automatically extinguished and the sterilizer will stop heating; when the temperature of the sterilizer decreases, the heating indicator lamp will automatically light up and the sterilizer will automatically heat up.
6. Disinfection beads can be used repeatedly, suggest 3 to 4 months to change or when dirty time to change. 
7. This is high-temperature disinfection machine, do not touch directly with the sterilizer, so as not to hurt/burn your hands.